AB Nightvision RVM-14 Build Kit
AB Nightvision RVM-14 Build Kit
AB Nightvision RVM-14 Build Kit
AB Nightvision RVM-14 Build Kit

AB Nightvision RVM-14 Build Kit

$795.00 CAD
Colour:Black
Lens Assembly:Housing Only (No Lenses)
Quantity:

The RVM-14 monocular housing is billet machined from 7075 aircraft grade aluminum and designed to handle challenging real-world environments. The housing design accepts standard mil-spec PVS-14 lenses, or lightweight RPO lenses.

The monocular features a side mounting area to accept PVS-14 accessories and mounts with a standard ¼-20 thread. Two monos can also be attached to a bridge mount (RVM-14 Bridge) in a binocular configuration with the small dovetail incorporated into the top of the housing, or the dovetail can be used with the RVM-14 Arm for single mono use. Both the Arm and Bridge are articulating to lay back against the helmet when in the stowed position.

The monocular design features a rotary switch that doubles as gain adjustment. The switch initially turns the tube on at full brightness, then dims the MX-11769 image intensifier tube as the knob is rotated further. The unit includes an onboard infrared illuminator activated by a push button switch on the front of the unit. The button is
surrounded by a protective fence to prevent accidental activation. Indicators on the edge of the viewing area show if the IR LED is actively on, or if the unit detects a low battery.

The RVM-14 weighs 15% less than a typical single AA PVS-14 with a 50% longer battery life and has a much tougher housing.

The monocular is available in Flat Black and Flat Dark Earth. The components of the monocular are media blasted to give a non-reflective matte finish, then black anodized for durability. For the FDE option, Cerakote, a proven firearms finish, is applied over the anodizing to give a tough, attractive finish.

Key Features:

  • Power Source: (1) CR123 Size Battery
  • Focus Range: 9.8” to Infinity (and beyond)
  • Operation Time: Approximately 75 Hours at Room Temperature
  • Field Of View: 40 Degrees
  • Weight: 300g with std Mil-spec optics and battery
  • Dimensions: 2.0” X 2.6” X 4.2”
  • IR Illuminator: Built In
  • Water Resistance: Submersible To 66 FT
  • IR LED & LOW BATTERY INDICATORS: YES
  • INTENSIFIER TUBES: COMPATIBLE WITH MX-11769 STYLE
  • OPTICS: COMPATIBLE WITH PVS-14 EYEPIECE AND OBJECTIVE
  • WARRANTY: 5 YEARS ON HOUSING PARTS AND SERVICE PER POLICY

Kit will include all of the parts required to build

  • RVM-14 Housing
  • Infinity collar/close focus stop with set screws
  • Eyepiece locking collar
  • Lenses (optional)

Assembly tools, lenses and other components available, Click Here

US Milspec Standard

  • US Milspec standard lens
  • Good balance of resolution, transmission, and flare suppression
  • Low edge distortion

    RPO 3.0 Milspec+

    • Lightest weight lens assembly, includes lightweight diopter assembly
    • Low Profile
    • Excellent light transmission
    • Good dynamic light performance and flare suppression
    • Best center resolution and clarity

    US Milspec vs RPO 3.0 Comparison Available HERE

    Origin:

    • Manufactured in USA