


Astromod PVS-14 for Prime and Afocal
Product Info
Our AstroMod PVS-14 uses a standard Milspec or compatible commercial spec PVS-14 and changes two things:
-
We replace the standard infinity and close focus stops with a dual purpose D collar
This allows customers to quickly remove the objective lens and attach a 2" telescope adapter (included) to the infinity stop threads or swap back to any standard Milspec threaded PVS-14 lens. This means it is no longer necessary to use a C-mount housing for prime focus, or hunting down an old ENVIS lens to reconfigure your monocular back to general purpose use. This is a true dual purpose solution that retains the PVS-14's waterproof capabilities when converted to a standard lens.
-
We turn the battery compartment sideways
This moves the battery compartment out of the way from blocking a 2" telescope adapter anad allowing it to seat all the way into a telescope eyepiece well. It also allows much easier access to the power and gain knobs, accessing them from the right and left instead of front and back.
Note: Our Astromod adapter which relocates the battery compartment will not retain PVS-14 waterproofing, removing the adapter will allow the PVS-14 to be configured to fully seal again.
Origin:
Housing From USA (Noctis) or China (EON)
Lenses Manufactured in USA, or TAA Compliant Countries
Tubes Manufactured in France or China
Astromod Adapter made in Canada
- Night vision devices are warranted for life against defects in workmanship and assembly unless otherwise specified, however subcomponents will follow manufacturer's warranty.
- Housings follow manufacturer's warranty:
- Our OEM Housings: OP14, BNVD-1431 Mk.II, NVG-ALPHA, APNVG: 5 Years
- AB Night vision RVM-14, RNVG, RPNVG, RNVG-A, MGA: Limited Lifetime
- KB DT-2: 2 Years
- EON PVS-14: 1 Year
- Noctis PVS-14: 1 Year
- Image intensifiers are warranted for 1 year by the manufacturer.
- Lens assemblies are warranted for 3 years.
User error, negligence, and incoming fire are typically not covered under warranties.
Our nightvision devices are custom built to your specifications. Please allow up to one week for assembly, calibration, and testing prior to shipment.




Astromod PVS-14 for Prime and Afocal
our image intensifiers compared
Nightvision Built in Canada
Precision through Process
Our devices are assembled in a positive pressure clean room utilizing HEPA certified filters and strict circulation standards to ensure a dust free assembly environment. Our blowers for cleaning optical components use compressed, double filtered 99.999% dry Nitrogen.
Calibration and collimation are performed using our Hoffman Engineering ANV-126A and HVS-126 Night Vision Digital Calibration System. Waterproofing and environmental resistance are vacuum tested followed by a multi phase Argon purge using our digital vacuum and purge test set.
We strive to bring the highest quality standards to our customers. Our night vision devices are built and assembled in our specialized facility in Aurora, Ontario.














